Skip to main content
← All Resources
Car buildingOctober 3, 2026 · 4 min read

How to polish pinewood derby axles

Polishing the axles is the best hour you'll spend on a derby car. Kit nails come with rough spots and bumps, and every turn of the wheel rubs on them. In our tools, polished axles with graphite make a kit car 0.209 seconds faster on a 38 ft track. That's about four and a half car lengths, and nobody can see what you changed.

What the axle does

The axle is the nail. The wheel spins around it. The hole in the middle of the wheel rubs against the nail the whole way down the track. That rubbing is friction.

Friction turns speed into heat. Rub your hands together fast and they get warm. That warmth is energy that used to be motion. Your car does the same thing at every axle, every turn of the wheel, for the whole run.

A kit nail straight out of the box isn't smooth. Look at one with a magnifying glass. You'll see ridges along the shaft and a rough bump right under the head where the nail was made. Those are what you're getting rid of.

How to polish pinewood derby axles

You need a small file, wet/dry sandpaper in a few grits (400 up to 2000), metal polish, a soft cloth and a drill. An adult should run the drill.

  • File off the bump under the nail head and any rough marks on the shaft. Go gently. You're smoothing, not reshaping.
  • Put the nail in the drill with the shaft sticking out. Spin it slowly and hold a strip of 400 grit sandpaper around the shaft. Move up through the grits, 600, 800, 1200, then 2000. Wet the paper as you go.
  • Put a little metal polish on the cloth and polish the spinning shaft until it shines like a mirror.
  • Clean every bit of grit and polish off. Leftover grit keeps sanding inside the wheel.
  • Keep the nails straight. Don't press so hard that one bends.

Do the same for all four. It takes about an hour and a half the first time.

Then add graphite

Graphite is a dry, black powder that makes surfaces slippery. Puff some into the hole in each wheel, put the wheel on the axle, and spin it to work the graphite in. Do it a few times.

It's the cheapest speed on the whole car. In our tools, graphite on its own is worth 2.6 car lengths, and it takes about 15 minutes. If you only have 15 minutes before the derby, spend them on graphite.

Do it before check-in. At our derby, once racing starts, it's hands off. No more graphite, no adding weight. That keeps things fair for everybody.

What about polishing the wheels? Most of the speed is in the nail and the hole it spins in, not the outside of the wheel. Many derby rules don't let you change the wheels at all, so check yours before you touch them.

Four kit cars with the same shape, weight and wheels. Only the axles change. Polished + graphite finishes 4.5 car lengths ahead of out of the box, and graphite alone ends 1.7 behind the winner. Screenshot from our Wheel friction tool →

The physics, the simple version

How much friction you get depends on two things: how hard the car presses down, and how rough the surfaces are. You can't change the first one, because you want the full 5 oz. So you change the second.

Polishing cuts the friction at the axle by about 63% (μ 0.40 down to 0.15). Graphite cuts what's left by about another 47% (μ 0.15 down to 0.08). Together, that's about 80% less friction than a nail straight out of the box. μ is the friction number our tools use. The lower it is, the more slippery the axle.

The nail is tiny compared with the wheel. Its radius is about 1/14 of the wheel's. The rubbing happens at the skinny nail, so it only slows the outside of the wheel by about 1/14 as much. That's why a derby car rolls so well at all.

A small rub that never stops still adds up, though. On a kit car, the axles take about a quarter of the car's energy before it reaches the finish line. Nothing else takes more. After polishing and graphite, they take about a twentieth.

Our ranking of the five changes on a kit car. Polished + graphite axles come second, 4.5 car lengths, behind getting to 5 oz (5.4). Screenshot from our Where to spend your time page →

The friction numbers are estimates, not measurements. They're tuned to match published testing and to real race times on a 38 ft track, so the order of the upgrades is right. On a long track like that, the gaps come out bigger than in short-track tests. The exact decimals are our best guess.

Race the four axles

Our Wheel friction tool races the four cars from the first picture: out of the box, graphite only, polished, and polished + graphite. Press Race and the faded cars show how far back each one was when the winner crossed.

The Advanced side has a friction slider instead (μ 0.05 to 0.5), so you can see what a half-finished polish job is worth. Deciding what to do first? Where to spend your time ranks all five changes for a kit car, with how long each one takes.

The axles are half of the wheel story. The other half is getting the wheels in straight. Pinewood derby wheel alignment covers that.