The pinewood derby slowest car race
Two years ago a car rolled down our track and stopped exactly on the finish line. Then it crept forward, crossed, and ticked the timer. The room was electric. That was a slowest car race, and it's been one of the biggest races of our day every year.
The rule is simple. The slowest car that crosses the finish line wins the heat. The race builder has it as its own format, Slowest car, and this guide covers how to set it up and the few rules worth deciding first. For where it fits among the other formats, see the race formats post.
Who races in a slowest car race
At my derby it's for the kids who don't make the bracket. About 40 kids race, a four-lane bracket takes 32, and the 8 left over race each other for slowest. Being cut is a rough moment for a kid. Racing for slowest turns it into one of the loudest races of the day. We only run it for the kids. We have 10 to 15 adults, and they'd rather race for real.
It doesn't need a bracket to feed it. If you run lane rotation, take the slowest few cars in qualifying and give them their own race. It's still fun.
Pick the cars
The builder gives you two ways to fill it.
Pick cars shows every checked-in car with its average and best time from the races already run, sorted slowest first. Tick the ones you want. You can filter by category and search by car or racer name. You need at least two cars per lane, 8 on a four-lane track, before the Next button lights up.
From finished races fills itself. Choose the races it draws from and how many come through, for example the slowest 2 from each race or from each category. Once those races finish, the slowest cars are pulled in automatically. "Slowest" here is the average of a car's runs that crossed the line. A car that never crossed at all isn't picked, because you can't rank a car that never finished.
How the heats work
There's no qualifying. The bracket is seeded straight away, slowest first, so the two slowest cars can't meet until the final.
In each heat the slowest car that crosses the line wins and moves on. A car that doesn't finish never wins, and neither does a run you've marked "Don't count this run." If nobody in a heat crosses the line, the heat is raced again, and the new times replace the old ones.
That rule matters more than any setting. A car that stops halfway down the track isn't slow, it's stopped, and there's no way to judge it against the others. If you don't make the cars cross, there's no fair way to pick a winner. Say the rule before the first heat.
Check what your timer does with a slow car
Most timers stop waiting at about 10 seconds. After that, a car shows as No finish, even if it crosses a moment later. In a normal race that never matters, since our fast cars finish in about 2.7 seconds. In a slowest race it can decide the winner.
What's your timer's cut-off? Can you change it? If not, does your crew know to watch for a car that crosses after the timer gave up? Find out at setup, before the race, with one car and a light push. If the creeping car from two years ago had taken 11 seconds, we'd have had a much quieter room.
The rest of the settings
"Most cars in a bracket" works like it does in a single elimination bracket: brackets come in lanes times 2, 4, 8 and so on, and "All that fit" takes the biggest one your cars fill. With 8 cars on four lanes it's one bracket of 8: two heats, then the final.
The final can be every lane, where the finalists run every lane and the slowest average wins, or one race. Every lane is fairer. One race is quicker and puts all the drama in a single heat.
It never counts
A slowest race is kept out of every standing, stat and award, and off the parent pages. It shows in race control and on the display screen, and nowhere else, so you can add it late in the day without touching anyone's place in the real results.