Pinewood derby single elimination brackets
A single elimination bracket on a four-lane track holds 8, 16, 32 or 64 cars. Nothing in between. Most of the bracket settings in the race builder are about that one fact: what to do with the cars that don't fit, and how to get the right ones through.
Brackets are the loudest part of my derby. We call ours the grand prix, and the room follows every matchup. They also take the most setting up, so here's every choice the builder gives you, with screenshots from a pretend event of 55 cars in three categories. For how brackets compare with the other formats, see the race formats post.
Qualifying sets the seeds
Every car runs a few timed heats before the bracket. The builder asks how many, from 1 to 5, and starts you on 2. We run two at my derby, after two rounds of free practice that don't count.
The cars are then ranked by average time and seeded into the bracket. The seeding is spread out so the two fastest cars can't meet until the final.
More qualifying runs give you a more trustworthy order, at a cost. Two runs each for 55 cars is about 28 heats. Four runs each is 55. I'd rather spend that time in the bracket, where every heat matters.
How a car moves on in the bracket
Each round halves the field. On a four-lane track a heat has four cars, so half the cars from each round have to go through. The heat winners go first. The rest of the spots go to the fastest cars that didn't win, taken from across the whole round. These are the wildcards.
Wildcards exist because the draw isn't even. A car that finishes 2nd in a heat with the two fastest cars in the building can be quicker than the winner of a slow heat, and it shouldn't go home for it. Picking by time across the round fixes that.
In numbers: a bracket of 32 starts with a round of 32, which is 8 heats. Sixteen cars go on, the 8 winners plus the 8 fastest of the rest. Then 4 heats, then 2, then the final. The builder also moves each car to a different lane than the one it just raced in, so nobody rides the fast lane through every round.
One bracket per category, or one for everyone
One per category gives every category its own bracket and its own champion. Categories rarely have the same number of cars, so their brackets are different sizes. The builder lines them up so every final lands at the end of the day. A smaller bracket simply starts later, which is what "joins here" means in the picture. The heats of different brackets take turns, so the crew isn't racing one category for 20 minutes while another waits.
One combined puts everyone in the group into one bracket with one shared final. At my derby the kids are one group and the adults another, so each gets one combined bracket and the adults never race the kids.
A bracket needs at least two cars per lane, so 8 on a four-lane track. If a category is smaller than that, the picture turns into a warning and tells you why, something like "Adults has 5 cars; a bracket on 4 lanes needs 8." Put that category in with another one, or give it a lane rotation race instead.
The cars that don't fit
"Most cars in a bracket" starts on "All that fit," the biggest bracket your cars can fill. With 55 cars that's 32, so 23 cars are out after qualifying. You can also choose a smaller bracket, 16 or 8, for a shorter day.
The cars left over are the hard part of single elimination. Being cut after two runs is a tough morning for a kid who brought a car they're proud of. There are two good answers.
The first is the opening round. When there are more cars than spots, everyone races one more heat before the bracket. Each heat winner goes through, and the best qualifiers fill whatever's left. A car that had a bad qualifying run gets one more chance to win its way in. It costs a round of heats, about 14 for 55 cars. Turn it off and the bracket takes the best qualifiers straight away.
The second is a race of their own. At my derby about 40 kids race, 32 make the bracket, and the 8 who don't race a slowest car race. It's one of the biggest races of the day.
"Fill short heats" is the small one. When the cars don't divide evenly into heats, one heat ends up with an empty lane. Tick it and the builder adds a random car to that lane.
Pick the final
The last setting is the final itself. "Every lane" has the finalists run every lane, four heats on a four-lane track, best average wins. "One race" settles it in a single heat.
Pick every lane. A bracket has already been a little unfair along the way, because one bad run ends a car's day. The lane rotation final brings it back to fair. Last year our final four had qualified 1st, 3rd, 4th and 7th, which is about what you'd hope for. One race is quicker, but whoever draws the fast lane in that heat has a head start, and that's a lot to hang a trophy on.
Decide on jumps before the first heat
Single elimination goes wrong in one way. A car jumps its lane or a start fails, and a car is out for something the kid didn't control. Decide what you'll do before race day and announce it twice. Our rule is that if your car knocks into another car, we re-run the heat, and if yours just comes off, we don't. The race formats post has the longer version, including the case I still haven't solved.