Pinewood derbyWheel alignment
Put the wheels in
The guide rail runs down the middle of the lane. Every time a wheel bumps it, the car slows down.
The car zig-zags, banging off one side of the rail and then the other the whole way down.
How it works
A guide rail runs down the middle of every lane, and the car straddles it. If a wheel points even a little off straight, it steers the car into the rail. Every bump turns some of the car's speed into a clack, and a car that bounces side to side can hit it a dozen times on the way down.
Wheels that point every which way also rub the body and wobble on their nails. Put together, crooked wheels can cost more than an ounce of missing weight. Push each nail in square, and roll the car on a flat floor: if it goes straight, you're set.
Fast cars often ride the rail on purpose. One front wheel steers the car gently into the rail, so it leans on the rail the whole way down and a warp or a joint in the track can't bounce it off. There's a sweet spot. Too gentle and it still bounces. Too hard and it grinds along the rail, and grinding is slower than bouncing. The rail rider and the car that pulls both run along the rail; the difference is how hard they push on it.